TMG Speed Bling fitted and reviewed

A sign of the times is that I have not received any build projects of late.

I am pleased to tell you TMG Speed – http://www.tmgspeeduk.com Have sent me some goodies for my SRX2 MH

Some nice bling and also some nice tools for future builds

I will do a small report and pictures as per usual. Thanks to https://www.facebook.com/tmgspeedUK/

for supplying the bits and of course the owner David Burton –
https://www.facebook.com/david.t.burton

Click the image to see the review

Team Xray T4 2017 First race

TORC (Turkey Onroad Racing Championship) Round 1
Date: 29-30 April 2017
Class: Stock 10th onroad EP touring cars
Location: Izmir, EFMOD Club track.
Car: Team Xray T4 2017 (www.rcbuilds.net)

Introduction: Due to no offroad race series this year I decided to join the Stock EP class and see if I enjoyed it.
I have only had 3 onroad races and they were spread over the last 3 years, so time to be a bit more serious.

Full report here

Small update for the Xray T4

I have now finished the electrics/body and fitted some options and needed parts for stock class racing

Fitted #293501 servo arm with 9mm (#302201) spacer to get similar exponential on the steering
Fitted #306191 T4 graphite + alu fully adjustable battery holder. This system allows the weight biase to be adjusted forwards and backwards, also sideways so a good tuning aid.
Fitted correct spur (100t 64p) and pinion (42t 64p) for stock class.
Fitted #302525 alu dual servo saver arm
Fitted #303804 rear 1.4mm anti rollbar

Only one thing left to fit and it has been ordered, I found the body needs adjusting height wise so I ordered #301351 x 2 sets alu adjustable body post stops which enables body height fine adjustment.

All on the build page as an update.

Build of Team Xray T4 2017 DONE

I have just completed the build of the new Team Xray T4 2017 model, I will be racing in this years Stock TC class so I will add more as I go.

But to see the build report please click the image below

Next build coming Team Xray T4 2017

Hi all, I am going to race the Turkish Onroad Championship (TORC) in the 1/10th TC Stock class, running Muchmore ETS 13.5t motor and HobbyWing JustStock ESC, I contacted my long term sponsor Umut at Team-NCRC who is also the distributor for Team Xray in Turkey.

He did me a great deal and I really thank him for that, so I decided to do the build here on my site.

My first race will be at Izmir in the South of Turkey at a fantastic track where they ran a round of the Euros onroad EFRA there a few years ago.

I am hoping to build at the weekend (25th March)

 

Build of the Serpent GT3.0 GP 8th car done

I know this car has been out a while but when I am hoping to race the class this year here in Turkey I decided to get a new car instead of upgrading my V2 GT GP car and was offered a great deal by John Knight of Serpent Turkey to do a build of the car here. 

I have had some great fun driving the V2 GT car last year especially the close racing with John and others at our local track. I have a big grin on my face when we do a little rubbing is Racing action.

See the build page below.

SWORKz new S35-3 1/8th Offroad buggy build done

I was approached by SWORKz to build the all new S35-3 1/8th offroad buggy, also sponsored by MW RC Products with SPower Nitro motor and exhaust system as well as Savox servos.

I am really thankful for the sponsored build and I enjoyed it a lot, I have included over 260 images as well as a lot of help and tips as I went through the build.

Click below to go to the build.

Welcome aboard to our new sponsors

We are very happy to announce some new sponsors have joined us here at RCBuilds, please welcome SWORKz and MW RC Cars
 
 
And the first build will be the new SWORKz S35-3 1/8 off road nitro power pro buggy, it will be fitted with SPower nitro motor and Savox servos supplied by MW RC CARS. Build to follow soon.
 
  
 
 

Serpent Spyder SDX4 Build Done

Finished the build albeit without ESC as waiting for it to arrive on race day. 

The car comes with with a ton of nice extras as standard and was a pleasure to build and cannot wait to test next weekend on a carpet track medium grip. 

This time I have worked with Tony Evdoka and both of us have included some nice tips and warnings.

Enjoy and thank you to the sponsors. Click the picture to see the build.