AM-110115 ALLEN WRENCH 1.5 X 120MM
AM-110120 ALLEN WRENCH 2.0 X 120MM
AM-110125 ALLEN WRENCH 2.5 X 120MM
AM-110130 ALLEN WRENCH 3.0 X 120MM
AM-110150 ALLEN WRENCH 5.0 X 120MM
AM-150155 NUT DRIVER 5.5 X 100MM
AM-150170 NUT DRIVER 7.0 X 100MM
AM-190008 TURNBUCKLE WRENCH 3MM – V2
AM-190025-P MULTI SHOCK-CLAMP V2
Optional:
AM-170063 Multi Alu Case for Screws (120X80X18)
AM-170052 TOOLS BASE
AM-500902 POWER TOOL TIP SET 4 PIECES WITH PLASTIC CASE
Exacto knife
Fingernail board
Cotton Buds
Digital Calipers
needle nose pliers
Digital Scales
Electronics Used in Build: All supplied by Team-NCRC and MKT Racing
SkyRC Toro TS160 ESC
HobbyWing 4.5t motor
MKT Racing Low Profile Servo
MKT Racing 7200mah Battery
There were no issues whatsoever the car went together a dream, always download the manual from the website to obtain the latest version. I decided to go with 2s battery setup as we will have a race series here and we will not be using 3s nor 1/8th motors etc.
There were wrong screws in step 11 should all be countersunk and I had 4 flat ones, not a problem for me as I have got a supply of screws etc.
I used an Xceed body for the test and build while my Protoform body is being painted.
Small one lap video of my test run:
Build Gallery Video:
Build Gallery in Pictures:
