AM-110115 ALLEN WRENCH 1.5 X 120MM
AM-110120 ALLEN WRENCH 2.0 X 120MM
AM-110125 ALLEN WRENCH 2.5 X 120MM
AM-110130 ALLEN WRENCH 3.0 X 120MM
AM-150145 NUT DRIVER 4.5 X 100MM
AM-150155 NUT DRIVER 5.5 X 100MM
AM-150170 NUT DRIVER 7.0 X 100MM
AM-190008 TURNBUCKLE WRENCH 3MM – V2
AM-190025-P MULTI SHOCK-CLAMP V2
3.5mm Nut driver
nail file from wife
Cotton Buds from wife
needle nose pliers
My overall impressions:
This was a very easy car to build, with just a few fiddly bits that may make you swear but apart from that it took me just half a day to build, I did not install electrics as I will not be running the car I will be selling it now it has been finished.
The kit had the usual quality I have come to expect from Serpent with no missing parts.
So there we are a great little kit to build, I finished as Hupo got the TQ for the Hudy Arena race in 1/12th stock using the same car so a great finish to the build.
Well done Hupo for becoming newly crowned European Stock Champion.
Tip 1: When gluing carbon chassis edges I always use one of my wifes nail files (cardboard type) and her cotton buds to apply the CA glue cleanly, also use a plastic bag to rest the glued parts onto as it will not stick to plastic bag material.
Tip 2: Make sure to take note of correct ball types as there are two different ones with flat edge and one with champhered edge.