Category Archives: News
Atomic RC BZ, 1/27 scale Belt Drive Touring Car LANDED
Here we go, the car and parts has landed at my home, thanks to Atomic RC See the website for info on the car also they have a facebook page
Full report and build here soon.
Unboxing photos
Part 1 Newbie guide to building a Quad Racer 250
Here is my part 1 Newbie guide with an honest account of problems and errors I made building. Part 1 covers what is FPV and my shopping list
Tenshock X812 2450KV motor on Serpent GTe test
I tested the Tenshock X812 2450KV brushless motor on Sunday in my Serpent Cobra GTe, unfortunately my local track had a political election rally so I could not use that track, I went to a track that I have never used before and the car setup was not good for it.
I had no grip what so ever and it was very bumpy. I wanted to get the video done so I asked another driver to drive the car who knew the track well.
Although the handling was not good on the car the same cannot be said for the Tenshock motor, it was superb with plenty of torque and the speed was amazing, the outside temp was 26 degrees so, first I put a 19t pinion with settings on the HobbyWing esc at punch level 2 and 11.25 degrees timing, also I unplugged the sensor cable as this would help the motor run cooler as advised by Gerri at Tenshock, once that was done we started the video.
The car ran very well except the poor handling on this track. The temperature of the motor was around 100 degrees when we finished the run which was fine.
After the video was done I set about trying to get some grip on the car as I still had a little time left before the horrible journey back home, I changed the front tyres to 50’s (Sweep) and rear tyres to 45’s, changed the sway bars front and rear to 2.3mm (upgraded sway bars not standard ones) I then took the car out on track to see what was what and Oh My God the car had so much grip it could now use the cars motor to its full potential, it was transformed from a good car to a completely different car altogether. I was having so much fun and could not stop smiling.
When my run was finished I checked the motor temp and it was a bit too high as after it stopping and me returning to the pits it was at 110 degrees so obviously now the car was setup correctly this was too much so I will return to my usual track next week hopefully and use a 18t pinion which should do the trick, the tyre wear was perfect so I am happy to now just tweek the pinion and ESC settings.
Now who will be a distributor here in Turkey for these awesome motors
Video: remember this is not with good handling car
Tenshock send 2 1/8th scale motors for testing
Tenshock Europe sent me 2 motors to test, first to test will be the Motor 1 on the Serpent GTe 1/8th car, video to follow.
Motor 1: The Sensored brushless motor TS X812 6-Pol Car Motor 2450KV for the Serpent GTe Onroad car, more info here on the motor
for 1/8 On-&Offroad
Features
- CNC machined AL heat sink casing
- High efficiency 6-Pole 18 Slots brushless motor
- Superior rotor design with insert magnets
- High purity copper windings making maximizes conductivity
- Powerful sintered neodymium magnet
- High torque and light weight
- 240 mm cable for more options
- Dual-plug sensor for all sensored and sensorless system
Details
| Poles | 6 |
| Power | 3500W |
| Length | 69,0 mm |
| Ø cage | 41,8 mm |
| Ø shaft | 5,0 mm |
| eight | 378,0 g |
| Skrews | 4 x M3; 2 x M4 |
| Hole pattern | 25,0 mm |
| max. temperature of neodym | 180 °C |
| Max. RPM | 52.000 |
| Recomended timing | 10 – 15 |
Motor 2: The Brushless Motor TS X-802 6-Pol Car Motor 2100KV unsensored for the Serpent Cobra 811 Be Buggy, more info on the motor here
for 1/8 cars
Features
- CNC machined AL heat sink casing
- High efficiency 6-Pole brushless motor
- Superior rotor design with kevlar wrapping
- High purity copper windings making maximizes conductivity
- Powerful sintered neodymium magnet
- High torque and light weight
- Powerful sintered neodymium magnet
Details
| Poles | 6 |
| Power | 3000 W |
| Length | 68,5 mm |
| Ø cage | 41,8 mm |
| Ø shaft | 5 mm |
| Length shaft | 17,0 mm |
| Weight | 375,0 g |
| Skrews | 4 x M3; 2 x M4 |
| Hole pattern | 25,0 mm |
| max. temperature of neodym | 180 °C |
| Max. RPM | 53.000 |
| Recomended timing | 8 – 12 |
Serpent S120 LTR Pan Car Build Completed
I completed the build of the Serpent S120 LTR Pan Car, for full build report click the image or go to the page
Some interesting photos from toy fair
I was sent some pictures by friends and Serpent of some new cars Serpent are releasing this year and of course I will be building.
Serpent Spyder SRX-4 Buggy
The new 4WD buggy from Serpent.
Here are a few interesting pieces of info I got from Serpent.
Q: Has it got gear diffs all round as standard?
A: ball diffs, gear diffs optional, same as 2wd ones
Q: Will it take full size servo or just low profile servo?
A: Just Low Profile
Q: Will it accommodate Shorty batteries or is it saddle packs only?
A: only with small mod, but fits (small cut in sideguard needed)
Q: What will the street price be for the car?
A: USA just above 400 usd
Q: When can we buy one?
A: late march
Default Gallery Type Template
This is the default gallery type template, located in:
/home/rcbuilds/public_html/wp-content/plugins/nextgen-gallery/products/photocrati_nextgen/modules/nextgen_gallery_display/templates/index.php.
If you're seeing this, it's because the gallery type you selected has not provided a template of it's own.
Serpent 1/12th S120 LTR Pancar
Default Gallery Type Template
This is the default gallery type template, located in:
/home/rcbuilds/public_html/wp-content/plugins/nextgen-gallery/products/photocrati_nextgen/modules/nextgen_gallery_display/templates/index.php.
If you're seeing this, it's because the gallery type you selected has not provided a template of it's own.
Serpent 1/10th Drift car
Default Gallery Type Template
This is the default gallery type template, located in:
/home/rcbuilds/public_html/wp-content/plugins/nextgen-gallery/products/photocrati_nextgen/modules/nextgen_gallery_display/templates/index.php.
If you're seeing this, it's because the gallery type you selected has not provided a template of it's own.
Welcome to the new RCBUILDS Website
Here at RCBuilds we started by doing builds for Serpent, when they came out with a new kit we would build the car for them and do a review including stage by stage pictures and description on www.tomhow.com, We also got info from others about any issues they had and made sure this was there for everyone to see.
Also some of the issues we found helped Serpent to change things on the car and/or in the manual.
So we decided to build a separate site here so that we could build other brands cars and do reviews also on them.
We need more car brands to contact us and also we are looking for an electronics company to provide electrics for the builds, in return advertising and featuring in each build as well as test reviews etc can be done.
So now we will feature builds of all brands should the manufacturers decide they want this, also we will add a service for other people so if they bought a kit and need it to be built we will do this for them for a small fee.
We hope you enjoy the builds and info.
















